€ 0,00 EUR
This is a pre-order for a different model of 3D printed insert that allows the use of 58mm filters with a wider range of iPhone models and cases. It is printed in biodegradable matte PLA and comes in black to reduce reflections, with dimensions similar to the original model. The filter attaches via a friction fit, using the 3D print lines as threads so it screws in securely and will not fall out but can be unscrewed when needed. This enables attachment of 58mm filters such as ND or polarizers for phone photography and video. To install, first place the compatible iPhone inside the supported case, as the insert requires a case and does not work without it, then align the outer edge of the insert with the inside of the case's camera cutout and press until it clicks into place. It has been tested with multiple iPhone models and cases, though full compatibility details will be confirmed upon release. The friction fit design holds the insert in place but is not tightly secured, and while it does not fall off by itself during normal use, it should be used at your own risk and with common sense. Filters are not included, but the NiSi V-ND 58mm 1-5 stops Pro Nano is recommended. As a product made by an independent creator, if you are not satisfied, please contact with details for resolution. Your pre-order helps me guage interest in different models and cases.